Step 1

Insert the round back legs into each of the holes on the underside of the piano and turn clockwise to tighten. Ensure they are both tight before continuing.

Step 2

Using the screws provided, attach the cross member brace (3) to the round back legs and ensure it is securely fastened.

Step 3

Insert one wooden dowel and one nut into the front leg of the piano and attach to the underside of the piano in the pre-drilled holes. Insert one long bolt through the top of the piano keyboard into the leg ensuring that the line on the nut is facing the same direction as the bolt. Tighten with an Allen key until securely fastened and repeat for the remaining front leg.

Step 4

Insert the music stand into the slot provided

Step 5

Insert one wooden dowel and one nut into each of the four legs of the stool.

 Step 6

Attach the leg of the stool to the underside of the seat using the pre-drilled holes. Insert one short bolt through the top of the stool into the leg ensuring that the line on the nut is facing the same direction as the bolt. Tighten with an Allen key until securely fastened and repeat for the remaining three legs.